Фев 192021
 

Настройка Tasmota (MCP23017) 16 Input/Output Ports

# Port D0-D7 OUTPUT

sensor29 0,5,0
sensor29 1,5,0
sensor29 2,5,0
sensor29 3,5,0
sensor29 4,5,0
sensor29 5,5,0
sensor29 6,5,0
sensor29 7,5,0

# Port D8-D15 INPUT

sensor29 8,2,1
sensor29 9,2,1
sensor29 10,2,1
sensor29 11,2,1
sensor29 12,2,1
sensor29 13,2,1
sensor29 14,2,1
sensor29 15,2,1

# Enable for binary Sensor
SetOption59 1

binary_sensor:
– platform: mqtt
name: “MCP23017 Test D8 SENSOR”
state_topic: “tele/tasmota/SENSOR”
value_template: “{{ value_json[‘MCP230XX’].D8 }}”
payload_on: “1”
payload_off: “0”
availability_topic: “tele/tasmota/LWT”
payload_available: “Online”
payload_not_available: “Offline”
qos: 0
device_class: door

https://tasmota.github.io/docs/MCP230xx/

Схема: Schematic_MQTT-Relay-8_2021-03-02

Rules:

Включить реле при активизации порта D15 и выключить.

rule on event#MCPINT_D15=1 do power8 on endon on event#MCPINT_D15=0 do power8 off endon

Включить и оставить.

rule on event#MCPINT_D15=1 do power8 toggle endon

rule on event#MCPINT_D15=1 do power8 on endon on event#MCPINT_D15=0 do power8 off endon
on event#MCPINT_D14=1 do power7 on endon on event#MCPINT_D14=0 do power7 off endon
on event#MCPINT_D13=1 do power6 on endon on event#MCPINT_D13=0 do power6 off endon
on event#MCPINT_D12=1 do power5 on endon on event#MCPINT_D12=0 do power5 off endon
on event#MCPINT_D11=1 do power4 on endon on event#MCPINT_D11=0 do power4 off endon
on event#MCPINT_D10=1 do power3 on endon on event#MCPINT_D10=0 do power3 off endon
on event#MCPINT_D9=1 do power2 on endon on event#MCPINT_D9=0 do power2 off endon
on event#MCPINT_D8=1 do power1 on endon on event#MCPINT_D8=0 do power1 off endon

 Posted by at 12:36

Sorry, the comment form is closed at this time.